Agilent Technologies Heartstream FR2, Руководство пользователя

Страница: 55 / 87

Using Setup Features
6-8 Setup and Advanced Mode Features
2. Make sure the “sending” H
EARTSTREAM
FR2 has the Training & Administration
Pack installed and is ready to send. (See the M3864A H
EARTSTREAM
FR2
Training & Administration Pack Reference Guide for instructions.)
3. Select RECEIVE SETUP from the setup menu:
4. A new screen comes up. Until the two H
EARTSTREAM
FR2 devices are properly
positioned, the screen displays READY TO RECEIVE and prompts you to check
the sending FR2.
5. Setup data are automatically transferred as soon as the infrared ports are
correctly aligned.
6. If you select EXIT before the transfer is complete, the revised setup will not be
received. When the transfer is complete, the screen on the “receiving” FR2
displays a SETUP COMPLETE message. Your H
EARTSTREAM
FR2 immediately
uses the new setup.
Receiving setup from a computer running C
ODE
R
UNNER
software is discussed in the
directions for use provided with C
ODE
R
UNNER
software.
Reading Setup
This method copies setup data from a data card to your H
EARTSTREAM
FR2. To read
the setup, follow these steps:
1. Insert the data card in the data card tray and install the loaded tray into the
data card slot in the H
EARTSTREAM
FR2.
2. Remove and reinstall the battery pack to bring up the first menu on the screen.
3. Select NEXT to go to the second menu screen
4. Select SETUP to go to the setup menu screen.
5. Select READ SETUP from the setup menu.
6. A new screen comes up. If the H
EARTSTREAM
FR2 cannot read the data card or
cannot find a valid setup on the data card, the screen displays a NO SETUP FILE
error message. Otherwise, the H
EARTSTREAM
FR2 begins reading the setup
information from the data card immediately.
7. If you select EXIT before the transfer is complete, the revised setup will not be
copied. When the transfer is finished, the screen displays a SETUP COMPLETE
message. Your H
EARTSTREAM
FR2 immediately uses the revised setup.
SETUP
RETURN
RECEIVE SETUP
READ SETUP
REVIEW SETUP
RECEIVE SETUP
EXIT
READY TO RECEIVE
CHECK SENDER
SETUP
RETURN
RECEIVE SETUP
READ SETUP
REVIEW SETUP
READ SETUP
EXIT
NO SETUP FILE
!