Agilent Technologies Heartstream FR2, Руководство пользователя

Страница: 12 / 87

M3860A and M3861A H EARTSTREAM FR2 Defibrillator 2-1
2 Preparing Your H
EARTSTREAM
FR2 for Use
Overview
There are a few basic steps to preparing your H
EARTSTREAM
FR2 for use:
Install a battery.
Set the clock in the FR2 (optional).
Run the battery insertion selftest.
Place the FR2 with recommended accessories in a convenient location.
The instructions presented here briefly describe the normal sequence of
preparation.
It assumes that you are using a fresh battery, that the selftest passes,
and that the factory default settings will not be changed. Exceptions to this
sequence are provided elsewhere in this User’s Guide.
Installing the Battery
The H
EARTSTREAM
FR2 is shipped with a M3863A battery pack. The battery is
enclosed in a gray plastic case. There is a yellow latch at one end that holds the
battery pack in place when it is correctly installed in the FR2.
Before installing the battery, make sure the defibrillation pads are not connected to
the FR2. To install the battery:
1. Hold the battery pack by the latch end and slide it into the battery compartment
at the top of the H
EARTSTREAM
FR2.
2. Slide the battery all the way into the opening, until the latch clicks into place.
The latch will click into place only when the battery is inserted correctly.
CAUTION: Follow all instructions supplied with the H
EARTSTREAM
M3863A battery pack. Install the battery
before the expiration date shown on the battery.
When the battery is installed, the H
EARTSTREAM
FR2 automatically turns on. The
Status Indicator displays a flashing black hourglass. The Shock button light and the
indicator light for the defibrillation pads connector port turn on briefly.