manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 56

aurora

Sonata

Hand Held ISDN Tester—User Guide

3-10

  427869

For example, 

S TE s PP m

 means that aurora

Sonata

 is operating

on the S interface, emulating a TE, acting as Slave at Layer 2
level, with point-to-point as the link type, acting as Master of
the Layer 3 protocol.

 Selecting the type of ISDN protocol link (PP/PMP)

When testing a Basic Rate link that uses ISDN protocol
support (i.e. it is not a fixed link) you need to specify whether
you intend to test an ISDN point-to-point (PP) link or a
point-to-multipoint (PMP) link.

CorNet-N and TN1R6-N only operate on point-to-point

links. Therefore, with these protocols, only the 

PP 

(point-to-

point) option is available for the 

Line Type

 setting.

CorNet-T and TN1R6-T can operate on point-to-point or
point-to-multipoint links.

For more information on PP/PMP links, see the 

Introduction

to ISDN

.

-1-

Choose 

Line Type 

to display an option

window:

-2-

Highlight the type of link you intend to test

and press 

ENTER

. The options are:

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды