manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 289

Issue 2 - 07/00

     A2-5

Appendix 2—Disconnection, Clearing & Error Codes

63

Service or option not available, unspecified

This cause is used to report that a service or option is not
available, only when no other cause in the ‘service or option
not available’ class applies.

65

Bearer capability not implemented

The equipment does not support the requested bearer
capability.

66

Channel type not implemented

The equipment does not support the requested channel type.

69

Requested facility not implemented

The equipment does not support the requested facility.

70

Only restricted digital information bearer capability is
available

The user has requested an unrestricted bearer service, but the
equipment only supports the restricted version.

79

Service or option not implemented, unspecified

This cause is used to report that a service or option has not
been implemented, only when no other cause in the ‘service or
option not implemented’ class applies.

81

Invalid call reference value

The equipment has received a message with a call reference
which is not currently used on the user-network interface.

82

Identified channel does not exist

The equipment has received a request to use a channel not
activated on the interface for a call.

83

A suspended call exists, but this call identity does not

The user has attempted to resume a call whose ID does not
correspond to any currently suspended calls.

84

Call identity in use

The network has received a Call Suspend request for a call ID
which is already in use for a suspended call within the domain
of interfaces over which this call may be suspended.

85

No call suspended

The network has received a Call Resume request for a call ID
which does not correspond to any suspended call within the
domain of interfaces over which the call may be resumed.

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды