manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 11

Issue 2 - 07/00

       1-3

Welcome to aurora

Sonata

 - Section 1

Intended readers

This Guide is intended for all users of aurora

Sonata

—normally

first- and second-line installation and maintenance personnel
in telephone companies and corporate end users. Some
telecommunications experience is assumed, but the Guide
includes some background information on the ISDN.

How the Guide is organised

The first two chapters of the Guide provide introductory
information for new users. Later chapters provide detailed
operating instructions for more experienced users, and the
appendices give background information.

Chapter structure

Chapt. 1

Introduces aurora

Sonata

 and the User Guide.

Chapt. 2

Basic instructions to get you started.

Chapt. 3

How to set up aurora

Sonata

 and connect and clear a basic call.

Chapt. 4

How to test an ISDN link by using aurora

Sonata

 to simulate

ISDN equipment or the network itself.

Chapt. 5

How to use aurora

Sonata

 to monitor protocol information or

listen to audio traffic on the line.

Chapt. 6

Advanced features such as call screening, and how to
download software and system settings.

Chapt. 7

How to produce and analyse protocol decodes.

Chapt. 8

The power sources for aurora

Sonata

 and how to maintain them.

Chapt. 9

The technical specification of aurora

Sonata

, along with

information to assist equipment purchasers.

Appx. 1

Diagrams to help you navigate through the menu structure.

Appx. 2

The codes which show why a call has failed, been
disconnected or cleared.

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды