Agilent Technologies auroraSonata, Руководство пользователя

Страница: 151 / 336

Issue 2 - 0700 4-41
Testing in Simulation Mode - Section 3
-4-
Enter the CPN and sub-address for a distant
test, if required.
Notes:
• If you set a new CPN here, it is used for all components
of all one-button tests.
• If you send the CPN, aurora
Sonata
waits for an Alerting
message (speech calls) or a Connect message (data calls)
before releasing the call. If you do not, it waits for a
Setup Acknowledge message for speech and data calls.
To set up a new CPN for the test:
• Select
CPN
to display an entry window.
Enter a CPN as normal—for instructions,
see
Identifying the CPN for the call in
Chapter 3 section 2.
• Select
SUB
if required and repeat the
process.
Tip
You can use the
Recall
and
Save
function keys to access
numbers in aurora
Sonata
’s speed-dial directory. For details on
speed-dialling, see Chapter 6 section 1.
-5-
When you have set up the test, press ESC to
return to the
Channel
component display.
Setting up the Full Channel test details
To change the operation of the Full Channel component:
-1-
In the
Channel
component display screen,
highlight
Full Channel
and press the
Setup
function key.
-2-
Select the bearer service and the CPN, as
described for the Outgoing Channel test.
Note
The Full Channel test is always Distant, so there is no
Destination
setting.