manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 119

Issue 2 - 07/00

       4-9

Testing in Simulation Mode - Section 1

You can test fixed links with BRI or PRI access, provided the
appropriate interface module is fitted. For Basic Rate you can
test fixed links at the S interface or at the U interface using
2B1Q, 4B3T or Up0 line coding. There are two methods:

•

replacing the NT with an aurora

Sonata

•

connecting aurora

Sonata

 and another device (e.g. a

Agilent Technologies ISDN tester) at either end
of the link, with one emulating a TE and the
other an NT

2 

Notes:

•

Because there is no D channel protocol, there is no way
to tell when aurora

Sonata

 receives a fixed link call. Both

ends of the link must be set up for fixed link operation.

•

When aurora

Sonata

 is set up to test fixed links you do not

have the option to use ‘any’ B channel (

Bx

) for the test.

For details on channel selection, see Chapter 3 section 2.

Introducing the ISDN Test Suite

aurora

Sonata

’s ISDN Test Suite offers you a quick and easy way

of performing the most common tests on an ISDN link.

If CorNet-T is selected you cannot use the Test Suite.

Displaying the ISDN Test Suite

-1-

Either:

•

in the top level menu, press the 

Test

function key

•

from the main 

Simulate 

menu, select 

ISDN

Test Suite

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды