manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 227

Issue 2 - 07/00

      6-19

Advanced Features & System Maintenance - Section 3

Note

Downloading does not begin until aurora

Sonata

 is connected to

the external power. Make sure that a battery is fitted, in case
the external power is removed during download.

When downloading is complete, aurora

Sonata

 displays its

Welcome screen, with the new software version number.

-5-

Exit Trendsend.

Note

When you switch on aurora

Sonata

, if there is no software in the

unit or an upload has been corrupted, the unit goes into
upload mode so that you can transfer new software.

Copying system settings between units

You can load all settings defined using the 

Setup 

menus from

an aurora

Sonata

 to a PC, and then from the PC to other units.

This allows you to upgrade the software in several units
without having to reconfigure them all manually afterwards.
You can upgrade one unit, configure it, then copy the settings
via a PC to the other units when you have upgraded them.

Note

The units to which you are copying settings must have the
same software version number as the original unit.

Uploading the settings to the PC

-1-

Set up an aurora

Sonata

 in the way you require,

connect it to a PC, and switch it on.

 Tip

To display the current setup of an aurora

Sonata

, press 

 +5

.

-2-

Start the Trendsend file transfer application on

the PC.

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды