Agilent Technologies auroraSonata, Руководство пользователя

Страница: 204 / 336

aurora Sonata Hand Held ISDN Tester—User Guide
5-10 427869
Beginning a protocol monitor session
When you press ENTER to select a channel (usually the D
channel) for protocol monitoring, you are prompted to enter a
name for the session.
-1-
Enter a name (up to eight characters). For
instructions, see Entering alphanumeric
information in Chapter 2 section 3. You cannot
use the name of an existing stored session.
Notes:
• When
Memory Mode
is set to
Fill
(see Choosing what
happens when the memory is full in Chapter 3 section 1),
once the memory is full you cannot save a new session
until you delete an existing one.
• If you do not assign a name, aurora
Sonata
automatically
names the sessions
M1
,
M2
and so on.
-2-
Press the
OK
function key to save the name and
begin the monitor session.
When you have set an automatic start time
When you have set up an automatic timed start for monitoring
(see
Entering an automatic start time earlier in this chapter),
and you press
OK
to start a session, aurora
Sonata
displays the
following screen:
The
Time
display shows the current time. When this reaches
the displayed
Start Time
, the monitor session begins.