manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 266

aurora

Sonata

Hand Held ISDN Tester—User Guide

8-6

  427869

When the battery is fully recharged, it is safe to leave the
charger connected for longer periods. If you do this, it
continues ‘trickle charging’ the battery to maintain full
capacity, and the 

Bat 

LED glows green very dimly.

Note

Avoid ‘force charging’ aurora

Sonata 

by repeatedly removing and

inserting the charger—this may cause excessive heat in the
tester and reduce the capacity of the battery.

Replacing a battery pack

It may be useful to carry spare battery packs with you, in case
the battery runs out at a site where no mains power is
available. Keep them in the carrying case until needed.

While you are replacing the battery, the real time clock and
system settings are maintained by a memory backup capacitor.
This should ensure that the settings are retained even if
aurora

Sonata

 is left without a battery for several hours.

To remove the old battery

-1-

Remove the battery pack cover, which is on the

back of aurora

Sonata

. To do this:

•

Loosen the screw by turning it 

anticlockwise

using a coin or screwdriver.

•

When the screw is completely released, it pops

up. Slide the cover upwards to remove.

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды