manualshive.com logo in svg

Agilent Technologies auroraSonata, Руководство пользователя

Поделиться
Скачать
Agilent Technologies auroraSonata Скачать руководство пользователя страница 20

aurora

Sonata

Hand Held ISDN Tester—User Guide

1-12

  427869

Number keys

Used for entering numeric
information. Some number keys

also combine with 

Shift

 (

)

to perform other tasks, as
described later in this section.

* (Asterisk)

Provided for compatibility with
standard telephone handsets.
Used for DTMF tones and with
the Keypad facility.

# (Hash)

Provided for compatibility with
standard telephone handsets.
Used for DTMF tones and with
the Keypad facility.

 

Arrow keys

You use these keys to move the
cursor. To move one step, press
and release an arrow. To move
several steps in the same
direction, hold down the arrow.

Enter

Press this key to choose a
highlighted menu item or setting,
or to start an operation.

Esc

Use this key to exit from menus
and windows.

Shift

You can combine 

 

with other

keys to perform specific tasks.
For details, see 

Using the Shift

key

 below.

Channel

You use this key to switch
between B and D channels. See

Selecting a channel for testing

 in

Chapter 3 section 2.

Содержание auroraSonata

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды