Agilent Technologies 8719D Скачать руководство пользователя

Страница: 11 / 673

General Safety Considerations

Warning

This is a

Class I product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only be

inserted in a socket outlet provided with a protective earth contact. Any

interruption of the protective conductor, inside or outside the instrument,

is likely to make the instrument dangerous. Intentional interruption is

prohibited.

Warning

No operator serviceable parts inside. Refer servicing to

personnel. To prevent electrical shock, do not remove covers.

Caution

Before switching on this instrument, make sure that the line voltage selector

switch is set to the voltage of the power supply and the correct fuse is

installed.

Warning

The opening of covers or removal of parts is likely to expose dangerous

voltages. Disconnect the instrument from voltage sources while it is

being opened.

Warning

The power cord is connected to

capacitors that may remain live

for 10 seconds after disconnecting the plug from its power supply.

Warning

For continued protection against

hazard, replace line fuse only with

same type and rating

The use of other fuses or material is

prohibited.

Warning

If this instrument is used in a manner not

Co., the protection provided by the instrument may be impaired.

Note

This instrument has been designed and tested in accordance with IEC

Publication 348, Safety Requirements for Electronics Measuring Apparatus, and

has been supplied in a safe condition. This instruction documentation contains

information and warnings which must be

by the user to ensure safe

operation and to maintain the instrument in a safe condition.

vii

Содержание 8719D


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды

Agilent Technologies 8719D, Руководство пользователя

Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды