Agilent Technologies 8719D Скачать руководство пользователя

Страница: 10 / 673

Safety Symbols

The following safety symbols are used throughout this manual.

yourself with each

of the symbols and its meaning before operating this instrument.

Caution

Caution denotes a hazard. It calls attention to a procedure that, if not

correctly performed or adhered to, would result in damage to or destruction

of the instrument. Do not proceed beyond a caution note until the indicated

conditions are fully understood and met.

Warning

denotes a hazard. It calls attention to a procedure which, if not

correctly performed or adhered to, could result in injury or loss of life.

Do not proceed beyond a warning note until the indicated conditions are

fully understood and met.

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol when it

is necessary for the user to refer to the instructions in the documentation.

The CE mark is a registered trademark of the European Community. (If accompanied by

a year, it is when the design was proven.)

This is a symbol of an Industrial Scientific and Medical Group 1 Class A product.

“CSA” The CSA mark is a registered trademark of the Canadian Standards Association.

Содержание 8719D


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды

Agilent Technologies 8719D, Руководство пользователя

Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды