manualshive.com logo in svg

Agilent Technologies 8719D, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 8719D Скачать руководство пользователя страница 613

Keyboards

A keyboard can be connected to the analyzer for data input such as titling 
The HP 

 Option ABA keyboard with the HP part number 

 adapter is

suitable for this purpose. Or, the analyzer is designed to accept most PC-AT-compatible

keyboards with a standard DIN connector. Keyboards with a mini-DIN connector are

compatible with the HP part number 

 adapter.

Controller

An external controller is not required for measurement calibration or time domain
capability. However, some performance test procedures are semi-automated and require the

use of an external controller. (The system verification procedure does not require an external

controller.) The system can be automated with the following computers:

n 

IBM PC compatible computer with an HP-IB/GP-IB interface card

n 

HP 9000 series 

 workstation

n 

HP 9000 series 700 workstation with HP BASIC-UX

For more information about compatible computers, call your nearest Hewlett-Packard Sales and

Service office.

Sample Software

A set of sample measurement programs is provided with the 

HP 

 

 

 

 on a 3.5 inch disk. The programs include typical measurements

to be used as an introductory example for programming the analyzer over HP-IB. It is designed

to be easily modified for use in developing programs for specific needs. The programs are

compatible with HP BASIC versions 2.0 and later, 

 and 

 and will 

 on an

IBM PC compatible computer (as well as the HP 9000 series 

 workstations), using

any HP 

 compatible printer or plotter.

The following additional software products are also available for the HP 

n 

HP 

 IC-CAP Modelling Suite

n 

Touchstone

n 

(MDS) HP Microwave Design System

n 

 Series-IV

External Monitors

The analyzer can drive both its internal display and an external monitor simultaneously.

Recommended Color Monitors:

n 

HP 

 Super VGA 1024 (14 inch display)

n 

HP 

 Ergo Ultra VGA (15 inch display)

n 

HP 

 Ultra VGA 1280 (17 inch display)

 

Содержание 8719D


































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды