Agilent Technologies 8719D Скачать руководство пользователя

Страница: 41 / 673

Analyzer Display

Figure 1-2. Analyzer Display (Single Channel, Cartesian Format)

The analyzer display shows various measurement information:

The grid where the analyzer plots the measurement data.

The currently selected measurement parameters.

The measurement data traces.

Figure 1-2 illustrates the locations of the different information labels described below.
In addition to the full-screen display shown in Figure

a split display is available, as

described in the “Making Measurements” chapter. In the split display mode, the analyzer

provides information labels for each half of the display.
Several display formats are available for different measurements, as described under

in the “Key

chapter.

Stimulus start value. This

value could be any one of the following:

The start frequency of the source in frequency domain measurements
The start time in CW mode (0 seconds) or time domain measurements

The lower power value in power sweep

When the stimulus is in center/span mode, the center stimulus value is shown in this

space. The color of the stimulus display reflects the current active channel.

Description and Options

Содержание 8719D


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды

Agilent Technologies 8719D, Руководство пользователя

Результаты поиска

Содержание 8719D

Отзывы:

Похожие инструкции для 8719D

Бренды по названию

Популярные бренды