Agilent Technologies 4349B, Руководство пользователя

Страница: 76 / 233

4349B
Reset K ey
The Reset key resets all instrument settings and correction data to the default values . The
4349B can also be reset by sending GPIB commands :SYST:PRES and *RST , with the same
results , except in a couple of cases . The following table lists the dierence among the results of
pressing the Reset key and sending the :SYST:PRES and *RST command, and also lists where
the settings are stored.
Data stored in the back-up memory is held for about 72 hours after powering OFF , The items
saved by the Save key or recalled by the Recall key are the same as those stored in the back-up
memory .
Data stored in the EEPROM is not aected by powering OFF .
T able 3-1. Reset Settings
Item Reset K ey :SYST:PRES
1
*RST
1
Stored in
T est voltage value Ch1 0 V Back-up memory
T est voltage value Ch2 0 V Back-up memory
T est voltage value Ch3 0 V Back-up memory
T est voltage value Ch4 0 V Back-up memory
Measurement parameter R Back-up memory
Measurement range mode A uto Back-up memory
Measurement range (A uto) Back-up memory
Measurement time mode 30 ms Back-up memory
A veraging rate 1 Back-up memory
Trigger source Internal Back-up memory
Trigger delay 0 s Back-up memory
Contact check OFF Back-up memory
Limit data 0 Back-up memory
Oset data 0 Back-up memory
Comparator OFF Back-up memory
Comparator Limits MAX, MIN Back-up memory
Display mode Measurement Data OFF Back-up memory
Correction ON OFF |
Correction data Cleared EEPROM
Beeper ON EEPROM
Beeper mode F AIL mode EEPROM
Data transfer format ASCII EEPROM
P ower line frequency No eect EEPROM
GPIB A ddress No eect EEPROM
Key lock N/A No eect OFF |
:INTT:CONT ON OFF |
1 \ "indicates the value is the same as what's indicated to the left.
3-10 Function Reference