Agilent Technologies 4349B, Руководство пользователя

Страница: 124 / 233

4349B
SENSe Subsystem
COMMAND P ARAMETER
[SENSe]
:A VERage
:COUNt <numeric value>
[:ST A T e] <Boolean>
:CORRection
:COLLect
[:A CQuire] OFFSet
:D A T Af 1j 2j 3j 4g ? f OFFSetj SCAP acitanceg
[:ST A T e] <Boolean>
:CURRent
:APERture <numeric value>[MSj S]
:RANGef 1j 2j 3j4g
:A UTO <Boolean>
[:UPP er] <numeric value>[P Aj NAj U Aj MAj A]
:FUNCtion <sensor function>
:CONT act
:D A T Af 1j 2j 3j 4g ?
:LIMitf 1j 2j 3j4g ?
:OFFSetf 1j 2j 3j4g <numeric value>[PFj F]
:VERify <Boolean>
[:SENSe]:A VERage:COUNt <numeric value>
Sets or queries the averaging rate .
<numeric value> is ,
numeric 1 to 256 (integer), default is 1
MAXimum 256
MINimum 1
Query response is <numeric value>, in <NR1> format.
[:SENSe]:A VERage[:ST A T e] f ON j OFF j 1 j 0 g
Sets or queries if the averaging function is enabled.
ON , 1 enables averaging.
OFF , 0 disables averaging.
Query response is f 1 j 0 g .
[:SENSe]:CORRection:COLLect[:A CQuire] OFFSet
P erforms the OPEN correction for all channels . The OPEN correction takes data with which
to cancel the oset error of the 4349B and the leakage of the test xture , and takes stray
capacitance data for the contact check function. The OPEN correction data is stored in
non-volatile memory(EEPROM). (no query)
The oset error of 4349B depends on the temperature . The OPEN correction must be
performed when the temperature changes .
T o perform a valid OPEN correction, conrm that required test xtures are connected to test
terminals on the front panel.
5-20 GPIB Reference