Agilent Technologies 4349B, Руководство пользователя

Страница: 115 / 233

4349B CALCulate Subsystem
:CALCulate f1j 2j 3j 4g:LIMit:CLEar
Clears the data which is reported by CALCulate{1|2|3|4}:LIMit:FAIL? command. (no query)
CALCulate{1|2|3|4} selects the channel.
:CALCulate f1j 2j 3j 4g:LIMit:F AIL?
Returns the comparison result from the selected channel. (query only)
CALCulate{1|2|3|4} selects the channel.
Query response is {1|0} . Where ,
1 comparison result is F AIL.
0 comparison result is P ASS.
:CALCulate f1j 2j 3j 4g:LIMit:LO W er[:D A T A] <numeric value>
Sets or queries the lower limit value of the selected channel.
CALCulate{1|2|3|4} selects the channel.
<numeric value> is ,
numeric 09.9210
37
to 9.9210
37
MAXimum 9.9210
37
MINimum 09.9210
37
Query response is <numeric value>, in <NR3> format.
:CALCulate f1j 2j 3j 4g:LIMit:LO W er:ST A T e f ON j OFF j 1 j 0 g
Sets or queries if the lower limit of selected channel is enabled.
CALCulate{1|2|3|4} selects the channel.
ON , 1 enables the lower limit.
OFF , 0 disables the lower limit.
Query response is {1|0} .
:CALCulate f1j 2j 3j 4g:LIMit:ST A T e f ON j OFF j 1 j 0 g
Sets or queries if the comparator function is enabled.
ON , 1 sets comparator function ON.
OFF , 0 sets comparator function OFF .
Query response is {1|0} .
Note
The comparator ON/OFF states of each channel are linked together . So the
CALCulate{1|2|3|4}:LIMit:STATe command toggles the comparator function
of all channels ON or OFF .
GPIB Reference 5-11