
P. To Remove FFD/GSD RH Oven
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE FFD/GSD LH OVEN’, Steps
2 to 6 (Ignore Para. 4).
Q. To Remove Oven Burner/Injector/Ignition
Electrode
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE FFD/GSD RH OVEN’.
3. The appropriate component can now be removed.
4. Re-assemble in reverse order.
NOTE: Check for gas soundness
R. To Remove Door LIners/Door Handles/Door Glass
1. Proceed as ‘TO REMOVE DOORS’.
2. Remove liner fixing screws (4 screws upper oven
door), (6 screws lower oven door).
3. Access can now be made to fixing screws of the
hinges, door glass and handle.
4. Re-assemble in reverse order.
S. To Remove Oven Lamp
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE TOP OVEN/GRILL
LINERS’.
3. Remove door seal if necessary by unhooking from the
four corners.
4. Lift out base panel to gain access to lamp electrical
terminals and disconnect cables.
5. Remove lamp lens.
6. The lamp body can now be removed by depressing
four retaining tags on the lamp body.
7. Re-assemble in reverse order.
T. To Remove Spark Generator
1. Isolate from electric supply.
2. Lower front mobility wheels (see section ‘MOBILITY
WHEELS’ in Users instructions) and pull forwards to
gain access to the rear of the cooker.
CAUTION: DO NOT STRAIN FLEXIBLE GAS
CONNECTION disconnect if necessary.
3. Remove mains cable inlet cover, 8 screws.
4. Disconnect electric cables to generator.
5. Remove two screws securing generator mounting
bracket to cooker frame and carefully withdraw
generator sufficiently to disconnect electrode leads.
6. Re-assemble in reverse order.
38
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished
Содержание 100 G FSD
Страница 43: ...43...