
M. To Remove Upper Door/Grill Liners
1. Proceed as ‘TO REMOVE DOORS’.
2. Remove door seal (upper oven only) by unhooking
from the front frame at the four corners.
3. Remove LH and RH shelf runners (2 screws per
runner). The liners can now be withdrawn. Also remove
4 top fixing screws.
N. To Remove Lower Oven Liners
1. Proceed as ‘TO REMOVE DOORS’.
2. Remove door seal by unhooking from its four corners.
3. Remove screws securing shelf runners (4 each side).
4. Remove rear liner 4 screws.
5. Remove rear liner mounting brackets 2 screws each
side.
6. Whilst supporting the roof liner remove side linings and
roof liner.
7. Re-assemble in reverse order.
O. To Remove FFD/GSD LH Oven
1. Proceed as ‘TO REMOVE SPARK GENERATOR’,
steps 1 to 3.
2. Remove lower back panel (10 screws).
3. Disconnect gas inlet connection to oven burner
assembly.
4. Disconnect electric cables from solenoid to spark
generator and neutral bar of mains terminal block.
5. From inside the oven, remove two burner bracket fixing
screws located either side of the burner aperture,
remove burner assembly sufficiently to gain access to
the ignition electrode lead, disconnect lead and
remove burner assembly.
6. The FSD/GSD can now be removed from the
assembly. Re-assemble in reverse order.
NOTE: Check for gas soundness.
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished
37
Содержание 100 G FSD
Страница 43: ...43...