10
Aesthetix Rhea Preamplifier.
When the remote is set to control the Rhea, its buttons will do the following:
1.
STANDBY
. Enters/Exits Standby mode when the rear panel power switch is on.
2.
DISPLAY
. Press to turn on or extinguish the front panel display and LEDs.
3.
UP
. Increases value in Gain and Load sub menus.
4.
LEFT
. Not active.
5.
RIGHT
. Not active.
6.
DOWN
. Decreases value in Gain and Load sub menus.
7.
ENTER
. Mute/Unmute the Rhea.
8.
MENU
. Not active.
9.
LEVEL UP
. Enter/Exit the Gain Menu.
10.
MUTE
. Toggles Mute on and off.
11.
INPUT
. Goes forward to the next Input (wraps around), when the Rhea is not in a sub menu.
12.
LEVEL DOWN
. Enter/Exit the Load Menu.
Note
: A software update may be required for the Rhea to respond to all of the above commands.
Aesthetix Calypso Preamplifier.
When the remote is set to control the Calypso, its buttons will do the following:
1.
STANDBY
. Enters/Exits Standby mode when the rear panel power switch is on.
2.
DISPLAY
. Press to turn on or extinguish the front panel display and LEDs.
3.
UP
. Increases the volume.
4.
LEFT
. Shifts the balance to the left.
5.
RIGHT
. Shifts the balance to the right.
6.
DOWN
. Decreases the volume.
7.
ENTER
. Mute/Unmute the Calypso.
8.
MENU
. Selects/Deselects the Tape Input.
9.
LEVEL UP
. Increases the volume.
10.
MUTE
. Toggles Mute on and off.
11.
INPUT
. Goes forward to the next Input. (Wraps around).
12.
LEVEL DOWN
. Decreases the volume.
Note
: A software update may be required for the Calypso to respond to all of the above commands.
