Aesthetix HRC-3, Руководство пользователя

Страница: 7 / 14

7
LED Timer
If the LEDs are set to ON in the LED Brightness sub menu (default), the amount of time they can be set to stay on
after detecting no motion can be set by the user.
To set the LED Timer to
1 second, press and hold the STANDBY button. While holding Standby, press the RIGHT
ARROW button and then let go of both. The LEDs will blink 5 times to acknowledge that this sub menu is active.
Press the UP button. The LEDs will blink 5 times to confirm the user selection and exit this sub menu.
The chart below details the button sequences utilized for the available range of timer settings. The factory default is
5 seconds.
Function
First
button Second button Acknowledge Function
Third
button Confirmation
Set LED timer STANDBY RIGHT ARROW LEDs blink 5 times 1 sec UP LEDs blink 5 times
3 sec RIGHT LEDs blink 5 times
5 sec DOWN LEDs blink 5 times
10 sec LEFT LEDs blink 5 times
20 sec ENTER LEDs blink 5 times
30 sec DISPLAY LEDs blink 5 times
Factory Defaults
To restore the factory default settings, press and hold the STANDBY button. While holding Standby, press the
INPUT ( > ) button and then let go of both. The LEDs will blink 5 times to acknowledge that this sub menu is active
and the Vol Up (+) button till be illuminated. Press the VOL UP ( + ) button. The LEDs will blink 5 times to confirm the
user selection and exit this sub menu. The remote will now operate with factory settings.
At the point of entering this sub menu, if the choice is made to abort this operation (keep settings as they are), press
any button other than the illuminated Vol Up (+) button. The LEDs will blink 5 times to confirm the user selection and
exit this sub menu.
Software Version
To display the current software version, press and hold the STANDBY button. While holding Standby, press the
DISPLAY button and then let go of both. All LEDs will turn off for one second and then the UP button LED will blink
X times. The total number of times it blinks is the software version number. After the last blink, the remote will
automatically exit this sub menu and return to normal operation.
Hardware Version
To display the current hardware version, press and hold the STANDBY button. While holding Standby, press the
LEFT ARROW button and then let go of both. All LEDs will turn off for one second and then the UP button LED will
blink X times. The total number of times it blinks is the hardware version number. After the last blink, the remote will
automatically exit this sub menu and return to normal operation.