9
Button Commands for Specific Devices.
Aesthetix Metis Preamplifier & Mimas Integrated Amplifier.
When the remote is set to control the Metis, its buttons will do the following:
1.
STANDBY
. Enters/Exits Standby mode when the rear panel power switch is on.
2.
DISPLAY
. Press to turn on or extinguish the front panel LEDs.
3.
UP
. Increases the volume or increases the parameter value when in a sub menu.
4.
LEFT
. Moves to previous input or selects the previous sub menu in the menu system.
5.
RIGHT
. Moves to next input or selects the next sub menu in the menu system.
6.
DOWN
. Decreases the volume or decreases the parameter value when in a sub menu.
7.
ENTER
. Mute/Unmute the Metis/Mimas.
8.
MENU
. Enter/Exit menus.
9.
LEVEL UP
. Increases the volume.
10.
MUTE
. Toggles Mute on and off.
11.
INPUT
. Goes forward to the next Input. (Wraps around).
12.
LEVEL DOWN
. Decreases the volume.
Aesthetix Janus Preamplifier.
When the remote is set to control the Janus, its buttons will do the following:
1.
STANDBY
. Enters/Exits Standby mode when the rear panel power switch is on.
2.
DISPLAY
. Press to turn on or extinguish the front panel display and LEDs.
3.
UP
. Increases the volume or increases the value in the Gain and Load sub menus.
4.
LEFT
. Shifts the balance to the left.
5.
RIGHT
. Shifts the balance to the right.
6.
DOWN
. Decreases the volume or decreases value in the Gain and Load sub menus.
7.
ENTER
. Mute/Unmute the Janus.
8.
MENU
. Selects/Deselects the Tape Input.
9.
LEVEL UP
. Enter/Exit the Gain Menu when Phono is selected.
10.
MUTE
. Toggles Mute on and off.
11.
INPUT
. Goes forward to the next Input. (Wraps around).
12.
LEVEL DOWN
. Enter/Exit the Load Menu when Phono is selected.
Note
: A software update may be required for the Janus to respond to all of the above commands.
