AEROTECNICA COLTRI MCH 14 TECH NITROX SERIES, Инструкция по эксплуатации

Страница: 40 / 117

40
Start up
4 Check the level of the lubricating oil of the pump
unit by looking at the indicator located The
indicators are marked by the letters “A” and
“B” (Fig. 44-45) and correspond to the same
marks also shown on the relative oil caps.
When oil has to be added, this indication will
be used to establish, according to the
indicator, which cap has to be unscrewed for
the filling operation.
If the level is too low, top the oil up following
the instructions given in the previous paragraph.
If the level is too high, discharge some of the
oil as described in chapter 11.4 “Changing the
lubricating oil”.
To dispose of the oil, refer to chapter 10.2,
“Disposal of waste”.
44
45
5 The operation to check the level of the lubricant must be carried out when the machine arrives and
then before starting up the compressor. It must be remembered that if the level is too low or too high
it may compromise the running of the compressor.
6 In order to check the correct connection of the electrical phases, the engine should be turned on and
the direction of rotation checked.