Aerotech MPS75SLE-025, Руководство по оборудованию

Страница: 7 / 48

MPS75SLE Hardware Manual Electrical Safety
Safety Procedures and Warnings
Read this manual in its entirety before installing, operating, or servicing this product. If you do not understand
the information contained herein, contact an Aerotech representative before proceeding. Strictly adhere to
the statements given in this section and other handling, use, and operational information given throughout
the manual to avoid injury to you and damage to the equipment.
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1.
Access to the MPS75SLE and component parts must be restricted while connected to a
power source.
2.
Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
3.
Disconnect electrical power before servicing equipment.
4.
Make sure the MPS75SLE and all components are properly grounded in accordance with
local electrical safety requirements.
5.
Operator safeguarding requirements must be addressed during final integration of the
product.
W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.
1.
Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts
must be restricted while connected to a power source.
2.
Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
3.
Do not expose the MPS75SLE to environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.
4.
The MPS75SLE must be mounted securely. Improper mounting can result in injury and
damage to the equipment.
5.
Use care when moving the MPS75SLE. Lifting or transporting the MPS75SLE improperly
can result in injury or damage to the MPS75SLE.
6.
The MPS75SLE is intended for light industrial manufacturing or laboratory use. Use of the
MPS75SLE for unintended applications can result in injury and damage to the equipment.
7.
If the MPS75SLE is used in a manner not specified by the manufacturer, the protection
provided by the MPS75SLE can be impaired and result in damage, shock, injury, or death.
8.
Operators must be trained before operating this equipment.
9.
All service and maintenance must be performed by qualified personnel.
www.aerotech.com vii