Aerotech MPS75SLE-025, Руководство по оборудованию

Страница: 39 / 48

MPS75SLE Hardware Manual Maintenance
4.3. Bellows Installation
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
1. Remove power from the stage.
2. Remove the (4) screws from the bottom of the stage that attach the motor cover. Remove the motor
cover.
Figure 4-3: Motor Cover Screw Location
3. Slide the two bellow support rods though the holes in the motor adapter plate. The ends of the bellow
support rods fit into machined slots in the opposite end of the stage. Screw (2) M4 setscrews in the same
two holes to push the bellow support rods from the ends – do not over tighten or the rods will bow.
Figure 4-4: Bellows Support Rods
www.aerotech.com Chapter 4 29