Aerotech MPS75SLE-025, Руководство по оборудованию

Страница: 31 / 48

MPS75SLE Hardware Manual Electrical Specifications and Installation
3.3. Motor and Feedback Specifications
Table 3-4: Feedback Specifications
Encoder Specifications
Supply Voltage 5 V ±10%
Supply Current 100 mA
Output Signals
Sinusoidal Type (Incremental Encoder)
: 1V
pk-pk
into 120 Ω Load (differential signals
SIN+, SIN-, COS+, COS- are .5V
pk-pk
relative to ground.)
Digital Output (Incremental Encoder)
: RS422/485 compatible
Limit Switch Specifications
Supply Voltage 5 V
Supply Current 25 mA
Output Type Open Collector
Output Voltage 5 V
Output Current 10 mA (sinking)
Output Polarity
Normally Closed (NC)
l
Sinks current to ground (Logic "0") when not in limit
l
High impedance (Logic "1") when in limit
l
Requires external pull-up to +5 V (10 kΩ recommended)
1.
If the MPS75SLE is driven beyond the electrical limit, it will encounter a mechanical stop. Impacting the mechanical stop could
cause damage to the stage even at low speeds.
www.aerotech.com Chapter 3 21