Aero AeroForce F2B, Руководство по установке

Страница: 9 / 30

9
AeroForce F2B
Installation Instructions
Step 2b
Installing Electric Motor and Fixed Roll Up Bar
1) Figure 9-1. Fasten motor RA/SWB (1) to the end plate of tarp housing with
three 5/16-18 x 7/8 FHCS (3).
2)
With screws provided, attach the cover to the motor. (Cover will need to be removed for wiring.)
3) Figure 9-2. When installing on a tarp housing use the motor cover (3) with
two #10 x 1 self-drilling pan head screws (5).
4) Figure 9-1. Unbolt and remove the shaft from end of fixed electric roll up bar (1).
5)
One end does not have a shaft. Remove the nut and bolt from that end. Insert end onto shaft of
motor RA/SWB (1), line up hole in roll up tube with hole in motor shaft, and with previously removed nut
and bolt secure roll up bar to shaft.
6) On the opposite end line up the fixed electric roll up bar (2) with the bearing and insert shaft through the
bearing.
NOTE: Make sure there is clearance on the outside of end plate of tarp housing to allow
shaft to stick out far enough.
7)
Bolt the shaft using the 1/4-20 x 2 1/4 hex bolt and 1/4-20 nylon hex nut removed in
Step 2b.4
.
Index Description Qty
1
Motor
RA/SWB
1
2 Fixed Electric Roll Up Bar 1
3 Motor Cover 2
4 5/16-18 x 7/8 FHCS 3
5 #10 x 1 Self-drilling Pan Head 2
3
5
Figure 9-2
Figure 9-1
1
2
4
Motor Cover
Cover Screws
1/4-20 Nylon Hex Nut
1/4-20 x 2-1/4 Hex Bolt