Aero AeroForce F2B, Руководство по установке

Страница: 16 / 30

16
AeroForce F2B
Installation Instructions
Step 4b
Install and Wire Motor for Semi-trailer Truck
NOTE: Use hardware pack Motor Kit #0311-963317
1) Install receptacle at the front of the trailer.
Attach the #6 wire to the butt connectors
on the receptacle.
For End Dumps
2a) Figure 16-1. Run #6 wire from receptacle to rear of
trailer, onto dump bed, back to the front of the trailer
and up to the motor. Secure all wire with clamps.
For Bottom Dumps
2b) Figure 16-2. Run #6 wire from receptacle up to
the motor. Secure all wire with clamps.
3)
Attach #6 wire to motor with
1/4 ring terminals.
#6 Black Wire
Terminal 1
#6 Red Wire
Terminal 2

Schematic
#6 Black Wire
Terminal 1
#6 Red Wire
Terminal 2














Figure 16-1 Figure 16-2