AERMEC Multichiller-Evo, Руководство пользователя

Страница: 9 / 44

9
STRUCTURE OF THE MENUS
The touch-screen panel on the Multichiller-Evo accessory allows the user
to manage all the device function through its graphic interface specially de-
signed to be used through the touchscreen; the information is easily and
orderly managed thanks to the implementation of a “home” screen where
you can view the state of the chillers connected to the accessory, while the
settings or display of more specific parameters are organised through diffe-
rent menus accessible through appropriate selection page, here each menu
is shown with a specific icon; the icons representing the various menus are
highlighted in the following diagram:
SELECTING THE MENUS
Icon Menu Description Notes
A ON/OFF
It allows you to turn the chillers on or off directly; it also contains the set points and differen-
tial settings and the control of the time periods enabled on the system
---
B CLOCK
It allows you to adjust the system clock (on the pCO5+ main board and on the touch-screen
control and command board)
---
C INSTALLER
It allows you to view the state of inputs and outputs of the Multichiller-Evo control board,
and it also allows you to: set the connection via BMS, set the thresholds and timings in the
ignitions, view the software information, modify the access password and data to be used
for the graphics menu;
ATTENTION: for software versions prior to version "1.2.0", the password is "0442".
Password (0000)
D
MANUFACTURER Protected menu not available to the user Protected menu
E SYSTEM LAYOUT
It allows you to view the information on each connected chiller (state, active loads, any
alarms and their reset) and verify the values read by the temperature probes connected to
the Multichiller-Evo The first page
is used as
HOME
F CHARTS
It allows you to view real-time charts of the values read by the temperature probes con-
nected to the Multichiller-Evo
---
G
LANGUAGE It allows you to select the system interface language ---
H
ALARMS It allows you to view details on the active alarms and access the alarm log
If an alarm is active,
the icon’s background
flashes red
I
Debug
It allows you to view the different pages containing a summary of the values read by the
chiller probes; this tool is used by the technical after-sales service/assistance to identify any
abnormal operation
This menu is not
normally enabled, you
must set the relevant
parameter in the instal-
ler menu to activate it
(page 35)
A
B C D
E F
G H
I