AEQ PHOENIX ALIO Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 91

AEQ PHOENIX ALIO Скачать руководство пользователя страница 87

AEQ

PHOENIX ALIO

87

B5. STUN protocol.

STUN  (Simple  Transversal  of  UDP  over  NATs)  is  a  network  protocol  of  the  client  /server  type
that allows NAT clients to find their public IP  address, the type of NAT where  it is located and
the  Internet  port  associated  with  the  local  port  through  NAT.  This  information  is  used  to
configure a UDP communication between two hosts located behind NAT routers.

NAT  (Network  Address  Translation)  is  a  mechanism  used  by  IP  routers  to  exchange  packets
between two networks that assign each other incompatible addresses. It consists of converting,
in  real  time,  the  addresses  used  in  the  transported  packets.  It  is  also  necessary  to  edit  the
packets to enable the operation of protocols that include address information within the protocol
conversation.  It  is  most  commonly  utilized  to  enable  the  use  of  private  addresses  and  still
provide connectivity with the rest of the Internet.

PHOENIX  ALIO  includes  a  STUN  client  that  sends  a  request  to  a  STUN  server.  The  STUN
server then informs the client of its public IP and which port has been opened by NAT to permit
incoming  traffic  to  enter  the  client’s  network.  This  information  enables  the  Phoenix  ALIO  to
identify  its position  within the SIP server. This protocol is  used  in  "AUTO3"  and "AUTO4" NAT
TRAVERSAL modes (see section 4.3).

Registration in a STUN server

«
...
85
86
87
88
89
...
»

Содержание PHOENIX ALIO




























































































Отзывы:

Нет отзывов