AEQ PHOENIX ALIO Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 91

AEQ PHOENIX ALIO Скачать руководство пользователя страница 72

AEQ

PHOENIX ALIO

72

MAC change screen detail

6.  Modify the value in the MAC field associated with the desired Ethernet interface.
7.  Press the "Apply" button.
8.  In  the  Internet  browser,  go  to  the  MAINTENANCE  section  and  ensure  that  the  MAC

address is now the correct one.

9. Power the unit down.

7.3. Technical Assistance Service and on-line manuals.

Clicking on the "Support" tab in the upper part of the screen will take you to AEQ website,
where you will find all the information you need to directly contact the AEQ Technical
Assistance Service, as well as all the technical information and manuals regarding the unit.

7.4. Saving and loading configurations.

In  the  MAINTENANCE  section,  in  the  lower  part  of  the  screen,  you  will  see  the
CONFIGURATION MEMORY option, from which  you can save the current configuration of the
unit (by means  of "DOWNLOAD" button) or  load a configuration previously created and saved
(by  selecting  the  corresponding  file  and  pressing  then  the  "Save  configuration"  button).  The
extension of the files used in this process is .AFU. The "Reset configuration" button allows you
to restore the default configuration of the unit.

Configurations screen detail

«
...
70
71
72
73
74
...
»

Содержание PHOENIX ALIO




























































































Отзывы:

Нет отзывов