AEQ PHOENIX ALIO Скачать руководство пользователя страница 2

Страница: 2 / 91

AEQ

PHOENIX ALIO

CONTENTS

1. INTRODUCTION. ...................................................................................................................... 5

1.1. General description. ........................................................................................................... 5

1.2. Technical characteristics.................................................................................................... 5

1.3. Available encoding algorithms. .......................................................................................... 6

1.4. Block diagram. ................................................................................................................... 7

1.4.1. Internal diagram. ..................................................................................................... 7

1.4.2. Audio matrix. ........................................................................................................... 8

1.5. Compatibility with other AEQ codecs............................................................................... 10

1.6. Compatibility with third-party codecs. .............................................................................. 10

2. PHYSICAL DESCRIPTION OF THE UNIT............................................................................. 11

2.1. Description of the right panel and connections................................................................ 11

2.1.1. Headphone 1 and 2 outputs.................................................................................. 11

2.1.2. Line inputs ("LINE IN"). ......................................................................................... 11

2.1.3. Line outputs ("LINE OUT").................................................................................... 12

2.2. Description of the back panel and connections. .............................................................. 12

2.2.1. Microphone inputs ("MIC1", "MIC2", "MIC3" and "MIC4"). ................................... 12

2.2.2. Ethernet port. ........................................................................................................ 13

2.2.3. Power supply......................................................................................................... 13

2.2.3.1. Using an external powerbank as an UPS. ............................................. 13

3. USER INTERFACE DESCRIPTION. MANUAL CONTROL. ................................................. 15

3.1. OLED Screen. .................................................................................................................. 16

3.2. Navigation / Channel encoder ("NAVI / Ch"). .................................................................. 17

3.3. Vumeters.......................................................................................................................... 17

3.4. Alphanumeric keyboard and call buttons. ........................................................................ 18

3.5. Inputs control.................................................................................................................... 19

3.6. Outputs control................................................................................................................. 20

3.7. Function keys. .................................................................................................................. 21

3.7.1. MODE keys ("IP" and "SIP"). ................................................................................ 21

3.7.2. "AUTO" key. .......................................................................................................... 22

3.7.2.1. SmartRTP / AutoAnswer. ........................................................................ 22

3.7.2.2. Auto Hang-Up. ........................................................................................ 22

3.7.2.3. Permanent call. ....................................................................................... 22

3.7.3. "CODEC" key. ....................................................................................................... 22

3.7.4. "HELP" key............................................................................................................ 23

3.7.5. "MENU" key. ......................................................................................................... 24

3.7.5.1. "ETHERNET" submenu. ......................................................................... 24

3.7.5.2. "COMMUNICATIONS" submenu. ........................................................... 25

3.7.5.3. "MAINTENANCE" submenu.................................................................... 26

4. CONFIGURATION AND OPERATION FROM REMOTE CONTROL SOFTWARE. ............. 28

4.1. Individual codec control window. ..................................................................................... 28

4.1.1. CONFIG Menu. ..................................................................................................... 29

4.1.2. Mixer control window. ........................................................................................... 32

4.1.3. Vumeters window.................................................................................................. 33

4.2. Connection modes ........................................................................................................... 34

4.2.1. RTP Point to Point (RAW)..................................................................................... 34

4.2.2. PROXY SIP........................................................................................................... 35

4.2.3. DIRECT SIP. ......................................................................................................... 37

4.2.4. Sending audio to multiple destinations: Broadcast, Multicast and Multi-unicast. . 38

4.3. NAT TRAVERSAL. .......................................................................................................... 41

4.3.1. Operation without NAT: "OFF (there is no NAT)". ................................................ 42

4.3.2. Manual NAT: "MANUAL (router configuration)". ................................................... 42

4.3.3. AUTO 1 (local network audio)............................................................................... 43

4.3.4. AUTO 2 (local network audio)............................................................................... 43

4.3.5. AUTO 3 (audio over internet). ............................................................................... 43

Содержание PHOENIX ALIO




























































































Результаты поиска

Содержание PHOENIX ALIO

Отзывы:

AEQ PHOENIX ALIO, Руководство пользователя, Страница: 2 / 91

Результаты поиска

Содержание PHOENIX ALIO

Отзывы: