AEQ PHOENIX ALIO Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 91

AEQ PHOENIX ALIO Скачать руководство пользователя страница 45

AEQ

PHOENIX ALIO

45

4.5. Coding algorithm selection.

See section 6.1.3.1 ("Coding selection") at "AEQ ControlPHOENIX" user’s manual.

Although  AEQ  recommends  the  use  of
OPUS  coding  algorithms  for  most  uses
(several different modes are available to
match  almost  any  need),  a  coding
selection  window  can  be  accessed  by
clicking  on  the  "Select  codec"  button
located  inside  the  "ENCODER"  area  of
the general configuration window,  where
both  OPUS  modes  and  others  provided
for compatibility can be found.

Note that the "DECODER" will be
automatically configured for the same
coding algorithm and mode.

However, when the interface
is IP and configured in any of
the SIP modes ("DIRECT
SIP"

or

"PROXY

SIP"),

particular coding algorithms
won’t

be

selected

and

connection  "profiles"  will  be
defined  instead,  containing
one  or  more  modes.  This  is
like  that  because  SIP  allows
the

participants

in

a

communication  to  negotiate
the  coding  algorithm,  so  the
one  to  be  finally  used  will  be
limited  to  those  includes  in
the selected profile.

This possibility allows the configuration of the parameters associated to the coding to be used in
Audio over IP networks basing on SIP protocol (Proxy SIP and Direct SIP modes).  This option
simplifies  the  selection  of  the  algorithm  to  be  used  in  a  communication,  because  most  of  the
codecs have several tens of encoding algorithms in order to have the higher compatibility  with
other equipments.

When a communication is established using SIP signaling, the codec negotiates the use of the
first compatible encoding  algorithm included  in a  list called  SIP CODEC  PROFILE. That’s  why
you should put these algorithms in order of preference.

Each  one  of  the  stored  entries  includes  an  alphanumeric  identifier  and  a  list  of  algorithms  to
use,  organized  in  order  of  preference.  There  several  preset  profiles  in  the  unit,  grouped  by
delay, quality… etc.

Profiles can be added, modified or deleted in the "Encoding Profile
Management  (SIP)"  screen,  accessible  from  the  "Tools"  menu  in
the  upper  Menu  bar,  described  in  paragraph  5.1.8  of  "AEQ
ControlPHOENIX" user’s manual.

«
...
43
44
45
46
47
...
»

Содержание PHOENIX ALIO




























































































Отзывы:

Нет отзывов