AEQ
PHOENIX ALIO
67
•
Return to the general configuration screen, check that the
selected encoding profile in the green "ENCODER" area
corresponding to that channel (PROG or COORD) is
correct, or otherwise click on "Select codec" to change it.
There are several pre-defined profiles containing several
particular algorithms each one, with preference ordering. They can be edited and more
profiles can be added. The called unit will accept the call using the first coding algorithm
that it supports from the list (independently of the profile selected in that unit at that
time).
•
Decide whether you will use the advanced automatic connection options or not:
o
"Autoanswer": Automatic call answering for all incoming calls, or only those
corresponding to a predefined caller.
o
"Auto hang-up": Automatic hang-up whenever audio packets are missed for a
given time.
o
"Permanent call": The device will do what’s necessary to keep the call up, even
after a line drop or mains cut.
o
"Apply audio profile to incoming calls": allows you to filter the SIP calls depending
on the encoding profile of the receiver.
•
Return to the individual codec control window and click on
"CALL" button corresponding to that channel, showing then the
call screen:
Enter the URI of the remote unit, either manually
or getting it from the buttons:
By clicking here, the last completed calls ("Calls") the contacts stored in the call book
("Eq. Contacts") or the reachable IP units ("Quick Dest.") are shown respectively, but
only those configured with formats compatible with channel and communication type.