AEQ
PHOENIX ALIO
54
5.3.2. Establishing an IP call in PROXY SIP mode.
When, for instance, due to compatibility issues with other manufacturers, SIP signaling is
required, relying on an external server to abstract from involved IP, ports, etc., the PROXY SIP
mode will be used:
•
Check that the unit is ON.
•
Check that the RJ45 cable is connected and latched.
•
Check that the amber LED, integrated in the RJ45 port, is flashing.
•
Establish the desired audio configuration (inputs routing, mix level, MIC4 / LINE IN
mode, and outputs).
•
If the coordination channel license is activated, select the channel we want to call from
by means of the "NAVI / Ch" button. The corresponding legend will get illuminated
between the vumeters (
PROG
or
COORD
).
•
Press the "SIP" key until "PROG/COORD CHANNEL - PROXY SIP MODE" is
displayed. Press the "MENU" key and select "COMMUNICATIONS". Under "SIP" menu,
verify that a valid PROVIDER is selected, a valid user is entered and the password is
correct; in case they are not, you can edit them (once all is filled in, confirmation is
provided by pressing the "NAVI / Ch" button, or cancelled with a long pressing of "ESC /
DEL" key; the cursor can be moved using the "NAV / Ch" encoder and characters are
erased with "ESC / DEL" key).
•
Select a valid SIP PROVIDER (that must have been previously stored in the unit using
the remote control software); the default provider is "AEQ", but up to 8 definitions can
be saved.
•
Verify the status of the communications. Check that the "SIP" key is steadily illuminated.
If it blinks, there is some problem with the Ethernet connection or the access or
registration on the Proxy server, and the unit won’t allow you to make any calls. If this is
the case, check connectivity and configuration under the ETHERNET, SIP and NAT
menus carefully (all of them accessibly with the "MENU" key).
•
Select a coding profile according to the desired quality and network capabilities by
pressing the "CODEC" button.
•
Establish the desired automatic options (Auto Answer, auto-hang up and permanent
call) by means of the "AUTO" button.
•
Press the "OK" button. The numeric keyboard will become illuminated in a color that
depends on the active channel: red (PROGRAM) or green (COORDINATION).
•
Using the "NAVI / Ch" encoder, select whether you want to call from an agenda contact
(CONTACT LIST), select one of the LAST CALLS or just type it in manually (URI):
When typing the URI manually, the cursor can be moved by means of the "NAVI / Ch"
encoder and characters at its left can be erased with the "ESC / DEL" key. The (*) key
shifts the writing mode between lower case (abc), capitals (ABC) or numbers (123). This
latest mode is useful to type IP addreses. In alphanumeric mode, the "1" key allows for
the insertion of several symbols (@, -, _, ., : ).
Once the URI is typed in, press the "OK" key to confirm or press the "ESC / DEL" key
for a longer time to cancel.
The URIs must be specified according to one of the following formats:
o
<dest_URI>
i.e:
phoenixMaster
o
<dest_URI>@<PROXY_domain>
i.e:
o
<dest_URI>@<PROXY_IP>
i.e:
o
<dest_URI>@<PROXY_domain>:<SIP port>
i.e:
[email protected]:5060