AEQ PHOENIX ALIO Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 91

AEQ PHOENIX ALIO Скачать руководство пользователя страница 24

AEQ

PHOENIX ALIO

24

Once this notification is confirmed by the remote operator, the ALIO’s "HELP" key will stop
flashing and the user will be notified through the OLED display that the remote operator has
acknowledged the call for assistance:

The notification can be cancelled at any moment by pressing the "HELP" key again:

3.7.5. "MENU" key.

This  key  is  not  following  the  active  channel  and  provides  access  to  the  configuration  menu  of
the ALIO. This menu also contains more advanced or less frequently used used options such as
Phoenix  ALIO  IP  configuration,  communications  parameters  (RTP,  SIP  and  NAT  parameters),
test  options  (loops,  tones,  etc.)  or  maintenance  operations  (firmware  version,  time/date
adjustment, system reboot, buzzer).

3.7.5.1. "ETHERNET" submenu.

The first available option is "ETHERNET" configuration. By entering this submenu (pressing on
the encoder button when the option is highlighted), we can access the IP configuration of the
unit, where we can specify whether it gets the configuration automatically (DHCP ON, requires a
DHCP server active in the local network).

«
...
22
23
24
25
26
...
»

Содержание PHOENIX ALIO




























































































Отзывы:

Нет отзывов