AEQ PHOENIX ALIO Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 91

AEQ PHOENIX ALIO Скачать руководство пользователя страница 6

AEQ

PHOENIX ALIO

6

Communications interface:

-

IP Ethernet port interface, RJ45 connector.

-

Two independent links can be established (when an optional 2

nd

channel is purchased)

using the same interface.

-

Satellite: an external satellite interface can be connected to the IP interface.

-

3G / 4G telephony: a 3G or 4G modem can be connected to the IP interface.

-

Wireless data links: a "wireless bridge", WiMax or WiFi antenna can be connected to
the IP interface.

Other features:

-

Front user panel with keyboard and rotary encoders.

-

OLED graphic display.

-

2 stereo LED VU-meters.

-

Operating temperature range: -10 to +45 º C (14 to 114 º F).

-

Dimensions: 242 x 210 x 60 mm (9.5 x 8.3 x 2.4 inches).

-

Power supply: 15V DC (9 to 18V DC).

-

Power consumption: 12W max.

-

External adapter: universal 90-263V input.

-

Optional UPS with 12V output for the audiocodec and two USB ports for router supply
and/or mobile devices charging.

AEQ offers the "SmartRTP" call initiation protocol in order to greatly simplify the
operation of the audiocodec.

AEQ also offers two SIP servers free of charge as a standard service for the users of
Phoenix ALIO. One of them is configured as main and the other is provided as a backup.
More information can be found in Appendix B.

1.3. Available encoding algorithms.

•

OPUS with Fs= 48 KHz, mono, stereo, with 4 mono and 3 stereo presets. Bit rates
between 12 and 192 Kbps, very low delay and audio bandwidth between 6 and 20 KHz.

•

G711 A-law, u-law (64 Kbps, low delay, 3.5 KHz audio bandwidth).

•

G722 (64 Kbps, low delay, 7 KHz audio bandwidth).

•

AEQ-LD with Fs=16, 32 or 48 KHz, mono or stereo. Available bit rates between 64 and
384 Kbps, audio bandwidth between 7 and 19 KHz.

•

MPEG 1 and 2 - LII, with Fs between 16 and 48 KHz, mono, stereo, dual channel and
Joint stereo. Binary bit rate between 64 and 384 Kbps. Audio bandwidth between 10.5
and 16.5 KHz.

•

PCM (linear): very low delay, transparent quality. Fs=48 or 32 KHz with 12, 16, 20 or 24
bits/sample, mono or stereo (bit rates between 576 and 2304 Kbps), audio bandwidth
between 16 and 20 KHz.

Additional encoding modes can be considered according to each customer’s specific needs,
such as:

•

AAC-LC*:

o

Mode: Mono / stereo / MS stereo. Sampling frequency: 24 / 32 / 48 KHz

o

Bitrate: 32 / 64 / 96 / 128 / 192 / 256 Kbps

•

AAC-LD*:

o

Mode: Mono / stereo / MS stereo. Sampling frequency: 48 KHz

o

Bitrate: 32 / 64 / 96 / 128 / 192 / 256 Kbps

* Operation with two AAC simultaneously not supported.

Please contact AEQ Sales Department or authorized dealers for more information.

«
...
4
5
6
7
8
...
»

Содержание PHOENIX ALIO




























































































Отзывы:

Нет отзывов