52
Ground Resistance Tester Model 6471
• If you need to change the Object number, press the ▲ button until the desired
number is displayed. Then press the ► button; the Test number now blinks.
• Press the ▲ button until the desired test is displayed.
•
Press the
MEM
button to display the
dEL
screen. By default, the blinking word
NO
appears on the screen, indicating the test is not to be deleted. To delete
the test, press the ▲ button to change the blinking
NO
to
YES
, then press and
hold down (>2s) the
MEM
button. To exit without erasing, perform a short press
on the
MEM
button.
Note that if the test stored in this Object/Test number is a sweep test (which con
-
sists of multiple measurements taken at different frequencies) this procedure only
deletes a single measurement. The remaining sweep measurements will still be
stored in this Object/Test. You must delete all individual measurements to com
-
pletely remove a sweep test.
When a test is deleted, its Object/Test number is removed from memory. When you
subsequently view stored tests, this number will be skipped. This Object/Test num
-
ber combination remains unavailable for storing tests until you completely erase
memory, as instructed in Section 7.3.1.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.888.610.7664
