AEMC 6471 Скачать руководство пользователя страница 27

Страница: 27 / 88

Ground Resistance Tester Model 6471

CHAPTER 4

OPERATION

NOTE:

For detailed information regarding ground resistance testing, see

the

Understanding Ground Resistance Testing Workbook CD

that was

included with the instrument.

4.1 General Operating Instructions

The Model 6471 has operating modes:

•

Automatic

mode for routine applications.

•

Manual (Expert)

mode in which the user can change the parameters of the

measurement functions.

NOTE:

Fully charge the battery before the first use (see § 9.4)

4.1.1 Automatic Mode

•

Set the switch to the desired function.

•

Make the connections appropriate to the function.

•

Press the

START/STOP

button. The device makes the measurement and

stops automatically.

•

Read the measurement result on the display and the relevant parameters

using the

DISPLAY

button.

•

To save the information in memory, use the

MEM

button (see § 7.1).

4.1.2 Manual (Expert) Mode

•

Set the switch to the desired function.

•

Make the connections appropriate to the function.

•

Select

MANUAL

mode.

•

Choose various measurement parameters using the

Hz/OPTIONS

button.

•

Press the

START/STOP

button. The measurement frequency or the direc

tion of the current (resistance measurement) can be changed during the

measurement. To view their impact upon the measurement and the param

eters relevant to the measurement use the

DISPLAY

button.

www.

ShopAEMC

.com

Shop for AEMC products online at:

1.888.610.7664

Содержание 6471

























































































Результаты поиска

Содержание 6471

Отзывы:

Похожие инструкции для 6471

Бренды по названию

Популярные бренды

AEMC 6471, Руководство пользователя

Результаты поиска

Содержание 6471

Отзывы:

Похожие инструкции для 6471

Бренды по названию

Популярные бренды