Manipulator Manual of AIR20-A Industrial Robot
General safety description
VII
Attention should be paid to maintenance work.
Warning
When switching on the power supply, part of the maintenance operation
is in danger of electric shock, as far as possible, the maintenance
operation should be carried out in the state of power off; professional
maintenance personnel should be designated according to the need to
carry out maintenance operation; other personnel should be avoided to
turn on the power supply when maintaining the operation; even if the
power supply must be
turned
on before the operation can be carried out,
the emergency stop button should be pressed and then the operation
should be carried out.
Warning
Please consult our company when you need to replace the parts.
The
replacement
of parts by the client may result in unexpected
accidents, which may cause the operator to be damaged and the operator
is injured.
Warning
When entering the security fence, check the whole system carefully and
make sure it is not dangerous. If there is a dangerous situation and have
to enter the
fence
, you must grasp the state of the system and be very
careful.
Warning
If you need to replace the parts, be sure to use our specified parts. If you
use a part other than the specified part, it may cause damage to the
operator.
Warning
When removing the motor and brake, the crane hoisting and other
measures
should be taken to remove the motor and brake, so as to avoid
the falling of the manipulator arm.
