Advantech ASR-5300I Series, Руководство пользователя

Страница: 6 / 122

ASR-5300I Series Hardware User Manual vi
 More than one person might be necessary to move the enclosure because of its
weight. Drives should be removed before moving the enclosure.
Important Notice
The use of Advantech-certified components is strongly recommended to ensure com-
patibility, quality, and normal operation with your Advantech products. Please contact
your distributor for a list of Advantech-certified components (e.g., SFP, SFP+, HBA
cards, iSCSI cables, FC cables, memory modules, etc.).
ESD Precautions
 Handle the modules by their retention screws, ejector levers, or metal frame/
faceplate only. Avoid touching the PCB boards or connector pins.
 Use a grounded wrist strap and an anti-static work pad to discharge static elec-
tricity when installing or operating the enclosure.
 Eliminate dust, debris, carpets, plastic, vinyl, and styrofoam from the work area.

Do not remove any module or component from its anti-static bag before installa-
tion occurs.
 Drives must not be stacked on top of each other without their protective drive
trays. Even when drives are fixed in the drive trays, contacting the exposed PCB
or rear-side interface may damage the drives.
About This Manual
The manual introduces the hardware components of the ASR-5300I series’ RAID
and JBOD systems, and explains how to install, monitor, and maintain these compo-
nents.
For non-serviceable components, please contact our support sites.
Firmware operation: Consult the Firmware User Manual on the CD-ROM.
SANWatch software: Consult the SANWatch User Manual on the CD-ROM.