manualshive.com logo in svg

ADEMCO VIDEO RapidView, Руководство по эксплуатации

Поделиться
Скачать
ADEMCO VIDEO RapidView Скачать руководство пользователя страница 9

Rapid View                                                                                              Operation Guide

Page 3                                                     © Ademco Video 2002 MNRDVO250602US

Chapter 1

5.1.2

To turn off auto-sequence

Press the ‘AUTO’ button. (LED is not illuminated = AUTO                
SEQUENCE ‘OFF’.)

5.1.3

To turn off auto-sequence and select a                  
particular camera

Press the ‘NUMBER’ button(s) which correspond to the required      
camera, then press the ’CAMERA’ button. (The AUTO SEQUENCE 
LED is no longer illuminated and the camera selected is displayed.)

5.1.4

Use of the ‘CAMERA’ button while                    
auto-sequence is on

When auto-sequence is ‘ON’, if the ‘CAMERA’ button is pressed      
repeatedly, then each of the cameras in the auto-sequence will be       
displayed in turn.

5.1.5

Absent cameras in auto-sequence

If a camera in the auto-sequence is absent, then the handset will auto-
matically skip to the next camera in the sequence that is present.      
(‘Auto-skip’.)

Note:

Auto-sequencing will be turned off if the joystick is 
moved or a telemetry button is pressed while the 
monitor under control is auto-sequencing. (Or while 
monitor 1 is auto-sequencing for the RapidView 8 / 2 
K and RapidView 16 / 2 K.)

5.2

Setting up Auto-sequence for Cameras

For example, to set up an auto-sequence using cameras 1, 2, 3, 4, & 5.

Press and hold the ‘AUTO’ button.

With the ‘AUTO’ button held down:

Press button ‘1’, then press the ‘CAMERA’ button.
Press button ‘2’, then press the ‘CAMERA’ button.
Press button ‘3’, then press the ‘CAMERA’ button.
Press button ‘4’, then press the ‘CAMERA’ button.
Press button ‘5’, then press the ‘CAMERA’ button.
Release the ‘AUTO’ button.

The dwell time will be five seconds, unless changed manually.   
See section 5.3, below, for more information.

Содержание RapidView
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды