ADEMCO VIDEO RapidView, Руководство по эксплуатации

Страница: 48 / 55

Operation Guide Rapid View
© Ademco Video 2002 MNRDVO250602US Page 42
Chapter 5
The camera number will be flashing, if this is the camera that has the
defined preset, then press the ‘AUX’ button.
If the presets have been defined on a different camera than enter the
camera number using the RapidView ’NUMBER’ buttons, then press
the ’CAMERA’ button. The RapidView will then display the selected
camera, see Figure xvii.
Note: If a camera number is entered and there is no video
signal at the RapidView camera input then the
RapidView will switch to the next available camera.
Figure xvii
Selecting a different Privacy Zone Camera
The ‘PRESET’ option for preset 100 will be flashing. If this preset has
been defined and is required to be a privacy zone then press the ‘AUX’
button to change it to ‘PRIVACY’. Preset 100 will now have the word
‘PRIVACY’ flashing.
The ‘AUX’ button can be used to toggle between ‘PRIVACY’ and
‘PRESET’. Press the ‘LOCK’ to end
EDIT PRESETS
CAMERA 01
100 PRESET
101 PRESET
102 PRESET
103 PRESET
104 PRESET
CAMERA TO SELECT
LOCK TO END