ADEMCO VIDEO RapidView, Руководство по эксплуатации

Страница: 22 / 55

Operation Guide Rapid View
© Ademco Video 2002 MNRDVO250602US Page 16
Chapter 4
‘inactive’ and the alarm timer associated with that
input has expired.
5.1 Cancelling Directly
As stated earlier, the highest priority alarm is displayed on the alarm
monitor. To select another camera for display (or to cancel the
RapidView ‘alarm mode’ if only one alarm input is active), the
highest priority alarm must be cancelled first. This is done by pressing
the ‘ALARM’ button one more time after it has been pressed to silence
the buzzer . The next highest priority alarm camera is then displayed.
To 'cancel' all the alarms that are currently active, the 'ALARM' button
must be pressed a total number of times equal to twice the number of
alarm inputs that are currently 'active'. (The buzzers for the alarms are
cancelled first and then when the buzzer is silent, the alarms
themselves are cancelled.)
5.2 Cancelling through the Alarm Menu
The menus can be selected while alarms are ‘active’ and if an ‘active’
alarm input is disabled in the ‘SET ACTIVE ALARMS’ menu (see
chapter 5‚ Menu Options, section 7.0), the alarm input will be
‘disabled’ when the menu is turned off. At this point the alarm timer
for the ‘disabled’ alarm input will start and when it has expired, the
RapidView will no longer respond to that alarm input.