Operation Guide Rapid View
© Ademco Video 2002 MNRDVO250602US Page 2
Chapter 1
Note:
Telemetry commands are always sent to the camera
that is displayed on monitor 1.
3.2
RapidView 8 / 2 K+ and RapidView 16 / 2 K+
An asterisk (‘*’) to the left of the camera number at the top left of the
image on the monitor indicates that this monitor is being controlled by
the keyboard.
Pressing the ‘MONITOR’ button toggles control between monitor 1
and monitor 2
Note:
Telemetry commands are always sent to the camera
that is displayed on the monitor which is being
controlled by the handset.
4.0
Camera Select
4.1
To select a camera
Press the number button(s) which correspond to the camera to be
selected, then press the CAMERA’ button.
For example, to select camera 5:
Press button ‘5’ then press the ‘CAMERA’ button.
4.2
Using the ‘CAMERA’ button to select cameras
If the ‘CAMERA’ button is pressed repeatedly, then each of the
available camera images will be displayed in turn.
4.3
Absent cameras
If a camera is absent then the handset will automatically skip to the
next camera that is present. (‘Auto-skip’.)
5.0
Auto-sequence Control
5.1
Basic Operation of Auto Sequence
5.1.1
To turn on auto-sequence
Press the ‘AUTO’ button. (LED is illuminated = AUTO SEQUENCE
‘ON’.)
Содержание RapidView
Страница 1: ...Document Number MNRDVO250602US RapidView Operation Guide ...
Страница 55: ......
