background image

Safety Summary

Safety-2

FOE-ANZENA00

product.

• When the product has ventilation outlets, do not stick or drop metal or easily flammable ob-

jects into the ventilation outlets.

• When using the product on a cart, fix it with belts to avoid its drop.

• When connecting the product to peripheral equipment, turn the power off.

Caution Symbols Used Within this Manual

Symbols indicating items requiring caution which are used in this manual are shown below to-
gether with their meaning.

DANGER

: Indicates an item where there is a danger of serious personal injury (death or seri-

ous injury).

WARNING

: Indicates an item relating to personal safety or health.

CAUTION

: Indicates an item relating to possible damage to the product or instrument or relat-

ing to a restriction on operation.

Safety Marks on the Product

The following safety marks can be found on ADC products.

: ATTENTION - Refer to manual.

: Protective ground (earth) terminal.

: DANGER - High voltage.

: CAUTION - Risk of electric shock.

Replacing Parts with Limited Life

The following parts used in the instrument are main parts with limited life.
Replace the parts listed below before their expected lifespan has expired to maintain the perfor-
mance and function of the instrument.
Note that the estimated lifespan for the parts listed below may be shortened by factors such as
the environment where the instrument is stored or used, and how often the instrument is used.
The parts inside are not user-replaceable. For a part replacement, please contact the ADC sales
office for servicing.

Each product may use parts with limited life.
For more information, refer to the section in this document where the parts with limited life are
described.

Содержание 8250A















































































































































Отзывы: