ADB Safegate CRE 10, Руководство по установке

Страница: 11 / 86

A.07.370e - Edition 2.0 11
Safety
2.5 Liability
ADB Safegate cannot be held responsible for injuries or damages resulting from non-standard, unintended
uses of its equipment. The equipment is designed and intended only for the purpose described in the
manual. Uses not described in the manual are considered unintended uses and may result in serious
personal injury, death or property damage.
Unintended uses includes the following actions:
„
Making changes to equipment that have not been recommended or described in this manual or using
parts that are not genuine ADB Safegate replacement parts or accessories.
„
Failing to make sure that auxiliary equipment complies with approval agency requirements, local codes,
and all applicable safety standards if not in contradiction with the general rules.
„
Using materials or auxiliary equipment that are inappropriate or incompatible with your ADB Safegate
equipment.
„
Allowing unskilled personnel to perform any task on or with the equipment.
2.6 Installation
Read the installation section of all system component manuals before installing your equipment. A thorough
understanding of system components and their requirements will help you install the equipment safely and
efficiently.
„
Allow only skilled personnel to install ADB Safegate and auxiliary equipment. Use only approved
equipment. Using unapproved equipment in an approved system may void agency approvals and will
void the warranty.
„
Make sure all equipment is rated and approved for the environment in which you are using it.
„
Follow all instructions for installing components and accessories.
„
Install all electrical connections to local code provided they are not in contradiction with the general rules.
„
Use only electrical wire of sufficient gauge and insulation to handle the rated current and voltage
demand. All wiring must meet local codes.
„
Route electrical wiring along a protected path. Make sure they will not be damaged by moving equipment
and animals (e.g. rodents).
„
Protect components from damage, wear, and harsh environment conditions.
„
Allow ample room for maintenance, panel accessibility (power products), and cover removal (power
products).
„
Protect equipment with safety devices as specified by applicable safety regulations.
„
If safety devices must be removed for installation, install them immediately after the work is completed
and check them for proper functioning.
WARNING
Use of the equipment in ways other than described in the catalogue leaflet and the manual
may result in personal injury, death, or property and equipment damage. Use this
equipment only as described in the manual.
WARNING
Failure to follow these safety procedures can result in personal injury or death.