Adaptec 2100S - SCSI RAID Controller, Руководство по установке, Страница: 57 / 100

3-22
Adaptec RAID Installation Guide
c
Remove the Adaptec RAID Installation CD and the driver
floppy disk.
2
Install and configure your Adaptec RAID controller as the
primary controller according to the instructions in
Chapter 2 .
3
Create a directory on the
C
drive named
nwupdate
.
4
Insert the driver disk you created in Step 1 .
5
Type
copy a:\*.* c:\nwupdate
.
6
Start the NetWare installation program from the NetWare CD.
Select the
Custom Installation option.
7
On the Server Drivers – Summary menu, highlight Disk and
CD-ROM Drivers and press Enter.
8
Highlight Select an Additional Driver and press Enter .
a
Select i2opci.nlm and press Enter.
b
Enter the slot number.
c
Highlight Save Parameters and Continue and press Enter .
9
When prompted to select an additional driver, select Yes .
10
Select
bkstrosm.ham
and press
Enter
.
a
Enter the slot number.
b
Highlight Save Parameters and Continue . Press Enter .
11
When prompted to select an additional driver, select No .
12
Highlight Continue Installation and press Enter .
13
Select Edit startup.ncf . If needed, edit the file so that
i2opci.nlm
is listed before
bkstrosm.ham
in your
startup.ncf
file.
14
Continue with the NetWare 4.2 installation according to the
Novell documentation.
15
Upgrade your existing NetWare server to the minimum patch
level specified by Novell.