Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 24 / 48

© Adam Equipment Company 2020
Remove the item from the pan. Press [Mode] to go back to “  ” to weigh another item, or
[

0/T

] to return to normal weighing.
10.4.4.3
Animal (Dynamic) Weighing Setup Parameters
When the “
Animal
” text is displayed, and you have selected  to set up the balance for
dynamic weighing (follow the set up instructions below):
The display will show
 Press [Setup] again and use the [Up] or [Down] keys to
select  or 
If  [deleted text] is selected, the following 3 parameters are available

Threshold  

Test time 

Delay 
 the following 2 parameters are available:

Test time 

Delay 
10.4.4.3.1 Threshold “
 ” ( For Auto mode only )
Press [Setup] when  is shown and the display will next show the minimum weight
of the item required by the balance to start the process for dynamic weighing. The value
shown will be the current value in the last selected unit.
The minimum threshold value can be changed from 1.0 to 100 grams using the keypad
numeric entry method.
To confirm the desired value, press
[Setup] or to escape without changing the value, press
[Mode].
Test time

Press [Setup] when  is shown and the display will next show the number of
seconds over which the balance will average to compute the final weight. The Test time
value can be changed to between 10 - 99 seconds using the keypad numeric entry method.
To confirm the desired value, press
[Setup] or to escape without changing the value, press
[Mode].
Delay

Press [Setup] when  is shown and the display will next show the number of seconds
pause before the sampling starts. The Delay value can be changed to between 0-99
seconds using the keypad numeric entry method.
To confirm the desired value, press [Setup] or to escape without changing the value, press
[Mode].
Mode

Auto  or Manual  modes are available. Whichever mode is visible when